1. Pole size:2-3/4''.
2. Outside Dia:9-27/32".
3. Avg. Max. holding power:202psi.
4. Should used with electro permanent magnetic chuck controller, systems are switched ON or OFF with simple electrical pulse.
1. Ensure higher magnetic and mechanical performance, as well as absolute reliability.
2. Owing to no power supply to keep the magnetic chuck ON, it could be used for long time and never get temperature to affect the accuracy of workpiece. "COLD" device, not subject to internal wear or deformation resulting from moving internal parts.
3. Easy and convenient to clamp a workpiece, shorten clamping time.
4. Most suitable for heavy duty machining on medium, large or even rough components.
5. Easily integrated with pallet change of Horizontal Machining Center and FMS System the magnetic chucks will be as geometrically stable as the table itself.
6. For the most powerful machine tools available. Systems are switched ON or OFF with simple electrical pulse. A variable output from 20%-100% is controlled from the operator push button unit.
7. Entirely independent of external power supply when holding workpieces. There is no risk, when power fails.
8. 2 seconds control for power ON & OFF. No electric power supply required to keep the magnetic chuck ON. Safety in case of power failure.
9. Customers need to buy electro permanent magnetic chuck controller to control it.
10. Workpiece MIN. thickness:10mm & MIN.4 block magnetic pole for workpiece.
| Item | Electro permanent magnetic chuck |
| Shape | Round |
| Pole Type | Standard |
| Pole Alignment | Transverse |
| Magnet Type | Permanent rare earth |
| Pole Size | 2-3/4" |
| Compound Style | No |
| Separator Size | 2-3/4" |
| Outside Dia | 9-27/32" |
| Avg. Max. Holding Power | 202 psi |
| Overall Height | 2-5/32" |
