About this product
1. Max RPM: 2000
2. Shank Size: Morse Taper 5
3. Load Capacity: 1764 LBS
4. TIR ≤0.0002"
5. Point Angle: 60
6. Point Length: 2.362"
1. The center adopts the combination of the precise deep groove ball bearings, thrust ball bearings and needle roller bearings.
2. It is applicable to the medium speed precise processing of medium-load for CNC lathes.
3. The prolonged mandrel can improve the cutting performance and reduce vibration.
4. The center is made of alloy tool steel and its hardness after being heat treated could reach HRC55-60. It is thus has high steel performance and high wear resistance.
5. The anti-dust seal on the front can prevent the cutting fluid and dust from entering into the bearings so as to prolong its service life.
| Live Center Category | Live Centers |
| Nose Style | Long Nose |
| Shank Size | Morse Taper 5 |
| Max. RPM | 2000 |
| Load Capacity | 1764 LBS |
| TIR | 0.0002" |
| Point Angle | 60 |
| Point Diameter C | 1.496" |
| Point Length D | 2.362" |
| Outside_diameter B | 2.992" |
| A | 1.748" |
| E | 5.098" |
| F | 10.197" |
| Dia. G | 0.787" |