1. Keeping vacuum with advanced patented sealing unit with standing various organic solutions (Patented No. 022640703).
2. Brushless DC Motor, sophisticated gear driving motion, it can work for a long time without any problems.
3. Operation panel, together with heat, rotary and lift, rotating speed and the temp. displayed digitally.
4. Equip with second temperature sensor, when the water bath is out of water, it will cut off the heating power to protect the equipment.
It is the suitable and ideal instrument for pharmacy,chemistry and scientific research institutions.
It is rotating with electric governor, so as let the flask rotate at the desired constant-speed.
It forms membrance under the negative pressure and constant-temperature heating with rotating, vaporizing efficiently,
then receives menstruum in the receiving flask by condenser.
Details of Rotary Evaporator R1005:
|
Brushless DC MotorLow temperature rise, low noise, large torque, high speed,high efficiency,low energy consumption,no spark, long life |
|
PTFE Sealing assembly superior sealing of rotation axis: fit for allcorrosive and high temperature experimentsin high vacuum. |
PTFE check valve forreceiving flask Hold vacuum for wholesystem easily when drain |
Water Bath Good safety: Equip with second temperature sensor,when the water bath is out of water,it will cut off the heating power to protect the equipment. |
Operation Panel together with heatrotary and lift,rotating speed and the temp.displayed digitally.
PTFE Feeding Valve guides material directly into flask,design for preventing material from splattering.
| Model | R1005 Rotary Evaporator |
| Glass Material: | GG-17 high borosilicate |
| Main Electricity: | 220 V(double-phase), 60 Hz |
| Speed Regulation: | Digital Step-less Regulation |
| Rotation Speed: | 10~120 RPM |
| Set Temperature: | room temp. ~ 200C |
| Temperature Control: | Digital temperature control |
| Keep Vacuum Pressure: | -0.098Mpa |
| Evaporating Flask Capacity: | 5L |
| Receiving Flask Capacity: | 3L, ISO35 |
| Power of Motor: | 100 W |
| Condenser Style: | Vertical Double Helix |
| Lifting Function: | Electric |
| Rising or Reducing Length: | 5.9 in. |
| Power For Water Bath: | 2 kW |
| Noise of Whole Unit: | ≤55 db (A) |
| Measurement: | 20 × 45 × 74 in. (H) / 99 lbs |
Placking list:
| Item | Qty | Refer to "sketch" |
| Main unit with heating bath(include motor,Electric controller) | 1 set | Main unit A |
| stainless steel pole | 1 set | stainless steel shaft B |
| 5L Rotary flask | 1 pc | 12 |
| 3L Receiving flask | 1 pc | 7 |
| Bearer carier for Receiving flask | 1 pc | 8 |
| PTFE check valve for receiving flack | 1 pc | Details 5th |
| Stainless steel flask quick clamp(35#) | 1 pc | 6 |
| Glass tube(connect condenser and receiving flask) | 1 pc | 6 |
| Glass vertical condenser | 1 set | 2 |
| Condenser holders | 1 set | 1&5 |
| Three-way valve | 1 pc | 3 |
| PTFE feeding port with PTFE open/colse valve | 1 pc | 4 |
| Rotary glass axis | 1 pc | Details 4th |
| Vacuum gauge | 1 pc | 9 |
| Engineering plastics Nuts | 2 sets | 10&11 |
| Use manual | 2 set | |
| Spare parts bag: | ||
| O sealing ring Φ 40 x 3 | 1 pc | |
| O sealing ring Φ 37.5 x 3.55 | 2 pcs | |
| Framework oil seal 25×36×7 | 1 pc | |
| Spanner(4mm) | 1 pc | |