About this product
1. Micro computer control system-automatically detects the pressure when in
cutting with double safety protect.
2. The tool is equipped with a double piston pump which characterized with a fast
approach towards the connecting material and transfer to high pressure
automatically by slow crimping.
3. lf a deviation from the set operation pressure or low battery charges
is identified, an acoustic signal sounds and a red display flashes.
4. One key control-press the trigger to start working,half loosing the trigger means stop
forcing pressure, loosing fully means piston Return to the original position.
5. A Temperature sensor makes the tool stop working automatically when the temperature is
over 60'C under long time working,the fault signal sounds, it means the tool cant
continue to work until the temperature reduced to the normal.
Our battery powered hydraulic cable cutter is easy to operate and easy to carry. Products are widely used in electric power services, electrical maintenance and other industries.
NEC series products have built-in intelligent detection system, with real-time feedback pressure of OLED screen, number of crimping, battery power.The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp.The unit is equipped with a special brake when stops the forward motion of the piston&die when the trigger is released.
The blade is made of high quality raw materials and is specially heat treated to make the blade durable and tough.
| Cutting force | 6T |
| Cutting range | 85mm/3.4inch CU/AL cable and armoured cable |
| Stroke | 92mm/3.6inch |
| Voltage | 18V |
| Capacity | 5.0A |
| Weight | 17.2lbs |
| Product size | 22.8 x 8.3 x 3 inch |
| Charging time | 90minutes |
| Package | Plastic case |
| Accessories | 2pcs batteries; 1pc charger; 1set sealing ring |
