1. Microcomputer control system-automatically detect pressure when it is crimping, with double safety protect. |
2. The hydraulic unit incorporates an automatic retraction which returns the piston into it is starting position when the maximum operating pressure is reached. |
3. The tool equipped with a fast approach towards the connecting material and a slow working stroke. |
4. The crimping head can be smoothly turned by 360°around the longitudinal axis in order to gain better access to tight comers and other difficult working areas.ined |
5. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes. |
6. All tools can be controlled by one trigger. These results in an easy handling and a better grip compared to a two button operation. |
7. A Temperature sensor makes the tool stop working automatically when the temperature over 60 degree. |
8. Under long time working, the fault signal sounds; it means the tool can't continue work until the temperature reduced to the normal. |