About this product
1. The pump can be used for a variety of hydraulic equipments.
2. All steel tank and chassis is built to handle tough industrial applications.
3. Integrated liquid filled pressure gauge takes out the guesswork when calculating force.
4. This electric oil pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank
5. It can work on several assignments such as lifting, pressing, bending, straightening,cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
The single acting electric oil pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank. It has the advantages of small size, high pressure, light weight, simple structure and easy to use. This pump is equipped with pressure gauge so as to observe the pressure when the pump is working at any time. So that users can observe the work of changes at any time.
The pump can be used for a variety of hydraulic equipments.If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
Before using this pump unit,check the oil tank of the pump,make sure there is enough oil in the oil tank and higher than the oil-window.
1), Open the air-out screw before operating the pump.
2), Inspect the oil pressure by the gauge.
3), Change the hydraulic oil every 18 months;or the oil less than oil-window.
4), Filter the oil before changing the oil,#15 hydraulic oil is recommended.
5), Handle the pump at 10-50℃.
6), Stop working once the motor is hotter and hotter to a higher temperature to protect the whole pump system.
7), Keep replacing the oil hose once any damage or aging,the standard rated pressure of oil hose is 105MPa.
8), Inspect the oil hose on 87.5MPa(recommended).
9), Replace the bearing parts and lubricate them accordingly every 18 months.
| SPECS | |
| Type | Electric Hydraulic Pump |
| Action | Single Solenoid valve acting |
| Oil Capacity | 488 Cubic Inches (8 liters/8000cc) 2.11 Gallons |
| Input voltage | AC 110V 60HZ |
| Flow rate | 0.6L/min(＞7Mpa) - 5L/min(＜7Mpa) |
| Working pressure | 290PSI - 10152PSI(2Mpa - 70Mpa) |
| Oil capacity | 8L |
| Motor power | 750W |
| Motor speed | 1400r/Min |
| Applications Include | Oil Hose(1.8M)/Quick Connector*2 |