About this product
The brewhouse equip with CIP cleaning ball, side manhole (for spent grain outlet), malt inlet port, liquid level, Lifting rings, heating tape, sieve plate board, tangent entrance, wort pump, drain outlet,
Brewhouse features:
1. Our Combined Mash/Lauter/Wort Kettle/Brewhouse have a two-layer structure inside: the upper layer serves the function of lautering and whirlpooling, while the lower layer serves the function of mashing and boiling.
2. A food-grade pump instead of the raker knife is equipped to stir the wort in mashing and boiling process, which saves the cost of equipping with the raker, and also reduces the labor cost because cleaning the vessel becomes easier.
3. Wort production of our integrated tanks varies from 50 to 1000 liters. Since electric heating is absolutely able to meet the demand, you can save the cost of configuring steam heating system (by using our equipment). Of course we can also configure steam heating system according to the customers’ special requirements.
4. Because of the all in one design, our tanks not only saves the cost of manufacture , but also greatly reduce the floor space.
Pump and standard accessories,etc
• Function: Brewing and Fermentation Accessories
• Wort Pump: Wort Flow Power Module
• Carbon dioxide bottle (14L, with gas meter, inflatable device)
• Toolbox /quickinstall tap connector /Electronic weighing
• Thermocouple thermometer, glass thermometer
• Brixmeter: Measuring sugar content,
• Plowing: for grist out of tank
• Pipeline Valves, Valve Gaskets (Silica Hygienic), Tube Holders
• Quick installation change diameter 51-25
• Instructions (equipment and beer brewing process)
II. Installation & training:
• The seller will send engineer to install the brewery equipment in buyer’s local.
• The buyer should provide food, accommodation and round trip tickets for our worker.
• The seller will be responsible for the visa cost (only one time).
• The service period is 7 days, including assemble the brewery and training the operator.
• The buyer pays USD180 per day for each engineer’s extended installation, buyer offers board and lodging.
For the beginners who has just entered the industry of craft beer brewing, a set of beer brewing equipment that's easy to operate, of low cost and occupies small floor area has already been their best choice. This all-in-one beer brewing machine that serves all the four main brewing steps of mashing, lautering, kettling/boiling and whirlpooling. Our brewhouse fulfill these four basic functions in one unit.
The Brewhouse is welded with a dimple jacket and pipe coil at the tank bottom, the pipe coil is designed to directly cooling down the wort with tap water (economic mode) or cold water tank. The wort can be cool down to 19-20degree in about 30 minutes. With cold water tank, it can cool down temperature in about 5 minutes.
Our all in one brewhouse is suitable for restaurant, micro brewery, home brewer and beginner.
Brewhouse
| Product Name | Integrated Brewhouse | Model No. | JD0.5 |
| Useful Volume BBL | 2.8 | Total Volume BBL | 3 |
| Net Weight LB | 803 | Product Size Inch | Φ42×h97 |
| Factory Number | JDT20201122697 | Date of Manufacture | 2020/11/20 |
| Power Supply | 460V |
Fermentation Tank
| Product Name | Fermenter | Model No. | JDF0.5 |
| Useful Volume BBL | 2.8 | Total Volume BBL | 3 |
| Net Weight LB | 933 | Product Size Inch | 38×38×90 |
| Factory Number | JDF202011221160 | Date of Manufacture | 2020/11/20 |
| Power Supply | 110V |
This brewhouse is an innovated integrated brewing tank, have 2 independent tank in one body.
Wort Delivery through the pipe connection.
One Equipment can finish all the brewing steps:
Mash, Lauter, Boiling and Whirlpool, Cooling.
Related Products
5m2 Plate Heat Exchanger stainless steel food grade
$299.00 $1,185.00