1. Item: AC series three-point combination
2. Port size: 1/4″NPT
3. Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
4. Max Supply Pressure: 145 psi; Operating Pressure: 0-145 psi
5. Includes Semi-Auto Drain & Polycarbonate Bowl , 0-150PSI Gauge & Bracket
Installation and Operating:
Made of aluminum alloy Hand valve adjust the pressure stably High precision pressure gauge
hard-strength guarantee long service life Push-down lock guarantee avoid outside force Clear calibration to reading easily
and adapting to various environment changing the pressure
Preparation Pressure Adjustment Dial Reading
Please make sure the max working pressure Pull up the hand valve and rotate it to adjust the pressure Install the gauge on the body tightly
meet your needs. as the marking of " +" or "-" shows Check that if the pointer rotated smoothly
Please clean the port and fitting before installation, Turning the pressure as you need and then push down the
to avoid bringing dust to the air path. hand valve to lock the pressure.
Manual type drainer High-transparency sight glass for checking easily High-transparency PC cup for checking easily
Convenient and low-cost Accurate valve to ensure the stability of Good material made long service life
oil providing
Drainage Oil Adjustment Oil Lubrication
Draining water by push drainer up Rotate the valve according to the marking of Ensure that oil inside is less than 80% of the cup
"+" or "-" to adjust the oil providing Tighten the oil valve after oil lubricating
The Filter, Regulator＆Lubricator is three part system. The filter is designed to remove most liquid and solid particles from the air supply. The Self-Relieving Pressure Regulator is used to adjust the outlet pressure. The lubricator provide oil to the air tool and increase the life of the tool.
| Item - FRL | Filter/Regulator/Lubricator | Filter Rating | 40 micron |
| Number of Pieces | 3 | Port Size | 1/4" NPT |
| Max. Working Pressure | 145 psi | Environment & Fluid Temp | 41-140 Degrees F |
| Adjusted pressure Range | 22 to 123 psi | Drain Type | Manual |
| Overall Length (A) | 5.5" | Overall Height (C) | 4.65" |
| Overall Width (B) | 1.9" | Fluid | Compressed Air |
| Max. Flow | 17.66 cfm | Oil | Turbine oil No. ISOVG32 |
| Bowl Material | Polycarbonate with Guard | Includes | Pressure Gauge |