1. Swing: 14"
2. Self-tightening drill chuck
3. Motor: 120V, 60Hz, single-phase, 1HP
4. Spindle speed: 220~3320rpm, 16 speeds
5. Spindle travel: 3-11/32" ; Spindle taper: MT2
6. Max. Drilling capacity: 25/32"
7. Column diameter: 2-53/64"
This floor drill press with 16 speeds and powerful 1 HP motor features crank handle operated rack and pinion vertical table movement, cushioned grip quill handles, and the table has lock levers.
DO NOT install or use any drill bit that exceeds 6-57/64" in length or extends 5-29/32" below the chuck jaws. They can suddenly bend outward or break.
Use the recommended speed for the drill bit and workpiece (Shown on the Manual) .
The drill bits that can be used are shown in following figure:
Keyless drill chuck
| Model | ZJ4120B | |
| Style (Type) | Floor | |
| Swing | 14 in. | 350 mm |
| Spindle Travel | 3-11/32 in. | 85 mm |
| Spindle Taper | MT2 | |
| Number of Spindle Speeds | 16 | |
| Range of Spindle Speeds | 220-3320 RPM | |
| Max. Head Swivel | 360 degrees | |
| Max. Drill Capacity | 25/32 in. | 20 mm |
| Drill Chuck Type | B22 Self-tightening drill chuck | |
| Chuck Capacity | 25/32 in. | 20 mm |
| Chuck Size | 25/32 in. | 20 mm |
| Table Size | 11-27/64 × 11-27/64 in. | 290 × 290 mm |
| Table Material | Cast-Iron | |
| Column Diameter | 2-53/64 in. | 72 mm |
| Spindle Distance to Column | 7-3/32 in. | 180 mm |
| Base Size | 18-7/64 × 10-45/64 in. | 460 × 272 mm |
| Base Material | Cast-Iron | |
| Has Work Light | No | |
| Power Requirement | 120V, Single Phase, 60Hz | |
| Motor Power | 1HP | 750W |
| Motor Phase | 1 Phase | |
| Overall Height | 62-63/64 in. | 1600 mm |
| Product Weight | 150 lbs | 68 KG |
| Shipping Weight | 159 lbs | 72 KG |
| Packing Size | 62-63/64" × 24-51/64" × 14-9/16" | 1600 × 630 × 370 mm |
