1. Low center of gravity, stable machine, Concrete Grinder & Polisher power: 10HP.
2. With out a gearbox case( Integrated-system gearbox) and for epoxy coating concrete marble granite.
3. Concrete grinder & polisher grinding width: 20", not include disc, need to buy 4 inches disc.
4. Concrete Floor Grinder Rotating speed: 1000-1800RPM, quickly clean the bottom dust,easy to keep the machine clean.
5. Concrete Floor Grinder Weight: 529lbs, heavy weight, hard buffer, large downward pressure, make strong grinding effect.
Concrete Floor Grinder & Polisher 10HP 230V 1 Phase 20" Grinding Width 12 Disc for Epoxy Coating Concrete Marble Granite
The machine is used for grinding and polishing of terrazzo, marble, granite, solidified floor, epoxy floor.The integrated gearbox,make the center of gravity is lowered, and the gearbox case is removed to avoid accumulation of dust.In addition, the front part of the machine is heavy, with great downward pressure and hard cushioning, which makes the machine's grinding force super strong.Small working width, suitable for beginners.
Under the same weight, horsepower and voltage, the concrete floor grinder has several differences:
Maneuverability
The controllability of the square machine is better than that of the circular machine (the circular machine will shake a lot when used on uneven ground).
Work efficiency
The working efficiency of the circular machine is higher than that of the square machine.
Work effect
The flatness of the round machine is higher than that of the square machine.
Because the parts of the circular machine are more precise, its parts are easier to damage compared to the square machine. The square and the circular have their advantages and disadvantages.
It can be seen from this that the round machine and the square machine cannot simply say which is good or which is not. The choice should be made according to the actual situation of the ground and the grinding requirements, and the right one is the best.
| 12T-520i | |
| Power | 10 HP |
| Voltage | 220 V |
| Power Supply | 1-phase |
| Grinding Width | 20" |
| Dimensions ( L x W x H) | 45" x 27" x 48" |
| Frequency | 60HZ |
| Inverter | 10HP |
| Rotating Speed | 1000-1800RPM |
| Weight | 529lbs |