1. Hole diameter: 1/8", overall length is 1-37/64" (40mm)
2. Material: high-grade 65Mn
3. Clamping range: 3/32" - 1/8" (0.086" - 0.125")
4. Total runout less than .00031 on these precise ER32 collets
The following schematic diagrams and product pictures are only for reference.
If you have any questions, please contact us.
Runout tolerance within 8 micron (0.00031") at 4×d position
Designed for use with cylindrical shank tools, not flats
The full length of the cutting tool should be placed in the collet
Made from 65Mn Alloy spring steel , vacuum annealing and hardened to HRC 42-45
Each collet gone through thermal aging process to eliminante grinding residual stress and long cryogenic treatment to imoproce wear resistance
This ER32 collet has a range of 3/32" - 1/8" (0.086" - 0.125")
Works in all ER32 collet chucks
Installation Instruction
1. Put the collet into the nut and gently rotate the nut, then the eccentric part of the nut is in the grooves, and the package is
pushed evenly along the arrow, and it can be loaded into the nut
2. Install the collet and the nut on the shank or machine tool shaft together, wipe the tool cylinder handle into the clamping hole,
and tighten the nut evenly with the wrench, until the tool clamp can be used (Note: install tools before fasten the nut so as not to
damage the collet)
3. When changing the tools, release the nut and collet with the wrench, unload the tools, push the collet along the arrow
direction, make it quit, and then change the other collet you needed
| Brand Name | Bodee |
| SKU | BB0105002A |
| Collet Series | ER32 |
| Size (d) | 1/8" |
| Clamping Range |
3/32" - 1/8" (0.086" - 0.125") |
| Diameter(D) | 1 - 19/64" (33mm) |
| Overall Length (L) | 1 - 37/64" (40mm) |
| Runout | ≤ 0.00031" |
| Shape | Round |
| Material Type | Alloy Steel |
| Net Weight | 0.36 lbs |
| Gross Weight | 0.38 lbs |
| Meas | 2.0 × 1.5 × 1.5 in. |
