About this product
1. Tire Changer Power Supply : 110V, 60Hz, 1Ph, 1.47 Hp |
2. Clamp Rim Size Outside: 9″ - 21″ |
3. Clamp Rim Size Inside: 13″ - 25″ |
4. Max. Tire Width: 14″ (355 mm) |
5. Max. Wheel Diameter: 39″ (1000 mm) |
Tilt-back Tower Design
The tilt-back tower provides greater clearance and access for tire removal and inflation.
Advanced Mechanical Arm
High-grade mechanical arm, the pulley part is in the form of a set, embedded with wear-resistant sliders, and matched with finely ground square tubes, so that the mechanical arm can run smoothly and freely.
Auxiliary Arms Run Smoothly
All joints of the auxiliary arm are installed with vertebral body bearings, which are smooth and smooth without jamming.
Three-point Assist
The three-point pressing structure saves time and labor when disassembling hard-wall flat tires, and the operation is simple and quick.
24" Thickened Plate
Thickened work plate, claws made of precision cast steel, non-slip and durable claw protection cover, high-quality all-aluminum small cylinder.
Great Bead Breaker Structure
Shovel tire structure, thickened shovel arm body, universal shovel, high-quality shovel protective cover, non-slip rubber plate.
Large Aluminum Alloy Cylinder
The large aluminum alloy cylinder can reduce machine vibration and friction, thereby increasing the service life of the cylinder.
Top-quality Pneumatic FRL
Special explosion-proof level lubricator, good pressure resistance effect and high safety factor.
Voltage | 110 V, 60 Hz, 1 Ph |
Power | 1.47 Hp (1.1 kW) |
Clamp Rim Size Outside | 9″ - 21″ |
Clamp Rim Size Inside | 13″ - 25″ |
Max. Tire Width | 14″ (355 mm) |
Max. Wheel Diameter | 39″ (1000 mm) |
Working Pressure | 145 psi (10bar) |
Max. Inflation Pressure | 50.75 psi (3.5 bar) |
Rotation Speed of Turntable | 6 r/min |
Max. Shaft Torque | 1200 Nm |
Pressure of Bead Breaker | 5952 lbs (2700 kg) |
Level of Noise | <75 dB(A) |
Machine Size | 37″ x 49″ x 77″ (940 x 1250 x 1970 mm) |
Net Weight | (The standard model )538 lbs (244 kg) |