About this product
1.Attach the test adapter to quick coupler of hand presssure pump, then press the hand pressure pump few times to push remain water out the test adaptor.
2.Drop pneumatic oil into the air hole of the hand pump end to lubricate the piston of hand pump.
1.Cooling System Leakage Test
1.Removing the original radiator cap from the radiator or expansion tank.
2.Choose the appropriate adapter from the test set and connect it to the radiator or expansion tank.
3 Now connect the hand pump to the adapter.
4 Press the test pump until pressure of 10 to 15psi is reached.
CAUTION:Avoid a pressure of 35 psi or more!
Check the pressure gauge,If the displayed value decreases,the leakage in the cooling system.
The cooling system has a leak,if there is pressure drop or water loss.
2.Radiator Cap Leakage Test
1.Remove the original radiator cap.
2.Choose the appropriate joint 2a or 2b and connect it to the radiator cap.
3.Press the test pump for few times and watch the pressure gauge.The pressure falling if the cap is defective.
4.Compare the measured pressure values with the standard-pressure of radiator cap.
- Material:
- Plastic
- Function:
- Water tank tester kit
- Packing:
- Carton Packaging
- N.W:
- 5.45kg
- Color:
- Blue
- Type:
- Hand inflation type
- OEM:
- Acceptable
- Selling Units:
- Single item
- Single package size:
- 56X49X13 cm
- Single gross weight:
- 6.200 kg
- Package Type:
- Ctn box