About this product
1. Rotary tiller adopt low gearbox body, Eight module gear transmission, the height of gearbox can be match with 40-80hptractors, |
2. the Tiller Angle between cardan shaft and horizontal plane which can effectively improve the cardan shaft drive efficiency and reduce the damage of the shaft. |
3. Tiller Blade is made by ø80 heavy seamless steelpipes and connected by new flange, install self-aligning bearings on both endsof the knife shaft, can automatically adjust the decentraction of knife shaft |
4. Good regional adaptation, it can realize multiple cropping rotation speed of 220-320r/min when the PTO is 720 r/min by changing the different ratio of a pair ofspiral bevel gear. |
5. The standard configuration includes a rotary tiller, 52pcs blades, PTO shaft |
71" Agricultural Farm tiller rotary cultivator 3 point tractor rotovator
- Rotary tiller adopt low gearbox body, Eightmodule gear transmission, the height of gearbox can be match with 40-80hptractors,
- the Angle between cardan shaft and horizontal plane is about 10degrees which can effectively improve the cardan shaft drive efficiency andreduce the damage of the shaft.
- Knife shaft is made by ø80 heavy seamless steelpipes and connected by new flange, install self-aligning bearings on both endsof the knife shaft, can automatically adjust the decentraction of knife shaft
- Using 65 mn, IT245 type rotary knife, its ability of crumbling soil is strong,it work once can achieve the effect of general plough works several times.
- Goodregional adaptation, it can realize multiple cropping rotation speed of 220-320r/min when the PTO is 720 r/min by changing the different ratio of a pair ofspiral bevel gear.
- Hanging mode of the machine adopt gantry suspension, thewhole framework in one integrated mass, force balance, good rigidity, highstrength
71" Rotary Tiller 1GQN180
Size | 80*44*45in |
Work width | 71inch |
Match Power | 36.75~51.45kw |
Weight | 405kg/892Lbs |
Blades quantity | 52pcs |
Work depth | 3.14~7inch |
Work effiency | 0.95~1.2h㎡/h |