MC-1250/MC-2500 with high quality configuration: Here are industrial standard configuration including fixed beam optical laser system, cutting following system, Mitsubishi servo system, imported ball screw, water-cooling system, Red-light pointer,exhaust-air system, off-computer system so as to guarantee high precision and reliability meanwhile make the machine more cost-effective! 

1. High precision, detailed capacity, and speed are key elements to obtain the best quality when laser cutting, this is why MINTECH incorporates Japanese Mitsubishi servo motors on the steel X and Y axis as well as digitally controlled Drivers. Servo technology is known for its high precision, smooth movements and the ability to operate without cogging at a high speed.

2. High qulity ball screw is a safe and fast movement system that delivers high precision and easy maintenance.

3. The machine comes with a USB input port for flash drives that allows you to load files into the internal memory and USB/Printer port (connection cable included) to connect it directly to a PC.

4. Perfect cutting thickness: Acrylic 30mm (1.2")

Main Accessories:

Packing List:

The number of package: 1
No.1 package
No.	Name		specifications	Remark
1	the main machine	1	MC-1250
2	air pipe	1	ODφ6	5m
3	surport unit	6
4	hoop	2	Ф200
5	vent-pipe	1	Ф200
6	support bar	50
7	toolbox	1		see toolbox below
8	water chiller	1	CW-5200
9	laser tube	1	150W
10	laser power	1	150W
11	fan	1	1.5KW	2640m³/h
Toolobox
1	therm-hypersensitive paper	10
2	cross target	1
3	adhesive tape	1
4	absolute alcohol	1
5	clean paper	1
6	tampon	1
7	cutting head	1		including lock nuts
8	focus lens	2
9	nozzle	2
10	screwdriver+	1
11	screwdrive-	1
12	monkey wrench	1
13	steel ruler	1	Length:150mm
14	hexagonal wrench	1
15	WF	10		For wire fixup
16	hoop	2
17	6-8 connecter	1
18	6-6 connecter	1
19	key	2
20	mirrors	5
21	Packing list	1
22	Limit switch	1
23	High voltage resistant tape	1
24	CD-ROM	1		Software

Applications:

Widely used in cutting and engraving acrylic, wood, leather, cloth and other non-metallic materials.

Attentions:

• When cut some materials such as acrylic, some harmful gas, smoke or powder may be produced. A purge kit (option) is recommended.

• The materials for machining or its output gas may be combustible, and the preventive methods should be adopted.

• Do not cut the high reflectivity material which wavelength is 10.6μm such as copper, gold, aluminum etc.

• Do not cut PVC (polyvinyl chloride) with a laser beam. The chemical heat reaction in combination with the humidity in the air will produce hydrochloric acid. Hydrochloric acid is hazardous to the operator and the laser system.