130-150W  51" x 35" RECI W6 CO2 Auto Focus Laser Engraving Cutting Machine With Industry Water Chiller

This CO2 laser cutting Machine Dimensions 

 High quality parts and Special designs of this laser cutting engraving  machine as following>>>>

1. MACHINE BODY >>>

    This laser cutting machine  could be split  into two layers and could pass through the door width 33.46" (85cm) 

2. FOMA WHEEL >>> 

 Quiet ,easier to move,strong load-bearing capacity and long service life. Each wheel could bear up to 2000kg.   

3.1 FRONT AND BACK ACCESS DOOR

The front and back access door can be opened ,and the materials can pass through the door ,so that it is very convenient for processing longer materials. 

3.2 WINDOWS >>>

Specially designed 3 acrylic transparent windows, which greatly facilitates users to check the working condition of the laser cutting machine. 

4. CONTROL SYSTEM >>>

DSP offline laser engraving & cutting  RUIDA controller RDC6445S; Smart touch screen panel, Full functioning,Convenient and efficient ,Easy to use

5. LASER HEAD WITH AUTO FOCUS >>>

High Quality Laser Head With Auto Focus Sensor It's More Easy To Get Focus(Auto Focus Only Available On Hard Materials)

6. LASER TUBE >>>

High  Quality W6 RECI LASER TUBE  130-150W with 10000 hours life time: Available for global warranty 18 months according Lable On The Tube;

7. WATER CHILLER >>>

CW5200 water chiller efficient refrigeration ,effectively cooling the laser tube ,ensuring the safe operation of the laser tube and  prolonging the service life of the laser tube 

8. STEPPER MOTOR >>>

 Leadshine 3 phase stepper motor , stable and safe performance,high torque ,high precision, low noise and low heat .

9.FOCUS LENS >>>

Diameter:20mm, focus Length:63.5mm 

    US imports of substrates,Edge polishing, high light transmittance,Reinforced coating process, durable and difficult to remove film,After  focusing, the spot is fine, and the cutting and engraving effect is very good.

10. LINEAR GUIDE RAILS>>>>

TAIWAN made liner guide rails ,Rugged and durable, low friction, low running resistance,Can effectively improve work efficiency,Low environmental requirements ,Works in harsh environments

IIVI ZNSE Focus Lens With Better Transmittance;

11.DOUBLE MOTOR DRIVE  ELECTRIC LIFTING PLATFORM >>>>

Double stepper motor which supply  strong power for up and down the worktable ,the worktable can be up and down >9.84" (25cm). Suitable for workpieces processing at different heights, with a wider processing range  The electric focusing speed is fast, which improves work efficiency. Belts  electric lifting, high precision and low noise.

According to different processing materials, this laser machine is equipped with two common work tables, which are convenient for customers to use for multiple purposes.

12. HONEYCOMB TABLE>>>>

      Suitable for soft and small material processing,such as leather, clothes, fabric,  paper ect

13. ALUMINIUM BLADE WORKTABLE >>>>    

 Suitable for hard and large materials, such as acrylic wood act.

14.  1 LED LIGHT >>>>

Install LED lights above the work platform, Illuminate the work area, it can see the work situation more clearly, and it is beneficial to control the work progress and processing quality.

14. 2  RED LIGHT POSITIONING >>>>  

Use red light as an indicator to confirm the location of the working

14.3  LIMIT SWITCH >>>>

A limit switch is installed at the end of the X Y axis to prevent collision and protect the machine.

15. ELECTRONIC DEVICES AND WIRING>>>

The layout of electronic devices is scientific and reasonable to prevent mutual interference with each other;

The wiring is professional and firm, clean and tidy, and the conduction quality is high.

16.1 EMERGENCY STOP SWITCH>>>>

The machine has abnormal operation, it can start the emergency stop switch, stop the work, and protect the machine.

16.2 COOLING FAN>>>>

Dissipate heat for the distribution box and protect electrical components

16.3  LEAKAGE PROTECTOR >>>>

Leakage protector to ensure work safety; 

16.4 MULTIPLE SOCKETS>>>>

Multiple sockets for powering exhaust fans, air pumps and water chiller, making it more convenient to use

17.FUNNEL WASTE COLLECTION DRAWER>>>>

Waste materials fall into the drawer, easy and quick to clean up

Standard accessories of this 1300x900mm laser cutting machine >>>>>

 CW5200  Water Chiller                                   550W Exhaust Fun                                   Air Pump                                         Smoking Pipe                                          U Dish 

           Limited Switch                              USB Cable                                  Sensor cable for chiller                   Power Cable                                Inner Hexagon Wrench

          Network cable                                           Ruler                                             Water Pipe                                     Clamp                                    Focal length Ruler

                                     Documents Bag                                                                                       Double-sided adhesive and Acrylic sheetsfor light path adjustment

Samples of 1390 Laser cutter >>>>

Strong Package>>>>