31" x 39" Pneumatic Heat Press Machine Double Pull Out Style Worktable 220V 3-Phase
Main:
1.Electronic digital temperature display, automatic constant temperature;
2.Heating plate and heating plate as a whole, safe, durable, uniform heating distribution;
3.High temperature resistantsilica gel bottom plate makes the baking printing pressure more uniform and nodeformation at 300℃;
4.Automatic timecontrol;Pressure adjustment is convenient.
Features:
1. Humanized design, fashionable and beautiful appearance, moresimple and fast operation, suitable for batch hot stamping processing;
2. Electronic digital display, microcomputer controltemperature, time, high accuracy;
3. The upper and lower thickened aluminum plate, 8 heat pipesmake the heating more uniform, no deformation of more than 300 degrees;
4 Bearing pressure, spring pressure regulating, so thatthe pressure is greater and more uniform!
Hot stamping required temperature and time as follows:
Pure cotton: 180-220 degrees, 15-25 seconds
Polyester: 180 degrees, 40 seconds
Lettering film: 160 degrees, 10 seconds
Chemical fiber: 150-180 degrees, 10-40 seconds
Hot drilling: 160-200 degrees, 10-30 seconds
Please refer to the above information, the actual operation tobe adjusted very well!
Voltage | 220V 3 Phase 60Hz |
Power | 9500W |
Temperature range | 0-399℃(32-750℉) |
Time range | 0-999 Sec |
Working size | 31" x 39" (80 x 100cm) |
Note: a small or medium-sized air compressor is needed . 3kw 0.5-0.8L displacement.