About this product
| 1. Precision hardended and ground gear drive headstock |
| 2. Powerfull 1HP AC motor |
| 3. Metal lathe 5-1/3" wide two precision’V’- beds are hardened and ground |
| 4. Mini Benchtop Lathe 1.1" diameter spindle bore with MT5 spindle taper |
| 5. 6 steps spindle speed from110 – 1800rpm under lower noise |
| 28" length of distance between centers |
product dimensions & net weight
Gear Headstock
Gear driven headstock and all gear are hardened, tempered and ground with low noise, the lubrication run in oil bat. 6 steps spindle speed from 170 to 2000rpm,
Independent and safety electric cabinet. 5" self-centering three jaw chuck are included, Safety protective cover for the chuck and main leadscrew equipped with a metal cover.
Featured carriage and apron
Full featured carriage and apron assembilties travel smoothly on finely
finished bed, providing super accurate and finishes. Apron power feed for cutting threads, "T" slot cross lisde and bed treated by hardened and ground, 4-way toolpost swiveled 40º on left and right
Gear change box
Gear in gear change box is made of metal and the box deployed with a micro-switch for safety opening the box door. It will be changed to metric or inch size threads as required.
Dial scale
Longitudinal travel: 0.02"/division
Full dial scale: 0 – 0.8"
Cross travel: 0.002"/division
Full dial scale: 0 – 0.08"
Tool-post travel: 0.002"/division
Full dial scale: 0 – 0.08"
Cutting tool size: 1/2" x 1/2"
Tailstock adjustment
Tailstock with V slide for lateral adjustment, the max. travel of quill of tailstock is 2" and adjustable offset by±5mm for taper turning,
sleeve and handwheel with inch scaling, also a MT2# dead center is included
Strong power motor
Big power electric motor at:
HP ranting: 0.75kw(1 HP)
Voltage rating: 110/220V (two voltage)
Hertz: 60
Phase: single
Amperage ranting: 10.4A(110V) / 5.2A(220V)
Poles: 4
Compact construction
Safety, reliability and convenience, follow rest and steady rest are available for selection.
Side view
The square style of Gear change box looks stronger and safety. It is featured 4/5" spindle bore, 3/4" leadscrew and a MT#2 tailstock,
power feeding in longitudinal direction. This is an awesome value and a lot of lathes for a hobby machinist.
Size | Internal Jaw | External Jaw | |
D | Clamping Range A-A1 | Jamming Range B-B1 | Clamping Range C-C1 |
125mm | 2.5mm -- 40mm | mm -- 1mm | mm -- 1mm |
( " ) | ( 0.1" – " ) | ( " -- " ) | ( " – " ) |
| Swing over bed | 250mm/9.84'' |
| Swing over carriage | 130mm/5.11'' |
| Distance between centers | 700mm/28'' |
| Spindle bore | 135mm/5.315'' |
| Spindle taper | MT4 |
| Steps of spindle speed | 115-1620rpm |
| Tool post travel | 70mm/2.75'' |
| Cross travel | 115mm/4.527'' |
| Rand of longitudinal feeds | 0.05-0.10mm/r |
| Metric threads | 0.2-3.5mm |
| Inch threads | undefined8-56TPI |
| MAX. travel of tailstock sleeve | 55mm/2.165'' |
| Taper of tailstock sleeve | MT2 |
| Motor power | 750W(1hp) |
| Hertz | 60hz |
| Voltage | 110/220v; single phase |
| Amperage rate | 10.1A(110v); 5.08A(220v) |