Bodee 6" High Precision Milling Machine Vise without Swivel Base

About this product

1. Sliding surface of the vise bed is flame hardened and ground

2. Jaw Opening: 160mm (6-19/64") ; Jaw Height: 48mm (1-57/64")

3. Parallel and accurate within 0.01mm/100mm (0.00039" /4"), squareness and accurate

within 0.01mm/100mm (0.00039"/4")

4. Each pound of force in horizontal induces 1/2 lbs. of downward force, eliminating jaw tilt

1. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downwar. The workplace does not move up, even if it is held at the top of the jaw plates

2. Four setting positions of the jaw plates are available, widening the jaw plates opening

3. Highest clamping power. It's very accurate and durable

4. The enclosed lead screw and sliding surface are harden and ground

5. Use highest quality ductile Iron 80000 PSI for minimum bending

Brand Name	Bodee	Jaw Width A	5-29/32" (150mm)
SKU	BD0501004	Jaw Opening B	6-19/64" (160mm)
Orientation Type	Horizontal	Jaw Height H1	1-57/64" (48mm)
Net Weight	73 lbs.	Base Length F	16-21/32" (423mm)
Gross Weight	77 lbs.	Base Width E	8-11/32" (212mm)
Meas	22 × 11.8 × 6.7 in.	Overall Height H	4-27/32" (123mm)

Model	Maximum Jaw Opening Capacity
Model	B(mm/in.)	B1(mm/in.)	B2(mm/in.)	B3(mm/in.)
LV-75 LV-3"	75 2 - 61/64	115 4 -17/32	160 6 -19/64	200 7 - 7/8
LV-100 LV-4"	110 4 - 21/64	152 5 - 63/64	218 8 - 37/64	208 8 - 3/16
LV-130 LV-5"	120 4 - 23/32	165 6 - 1/2	247 9 -23/32	305 12 -1/64
LV-150 LV-6"	160 6 -19/64	220 8 - 21/32	315 1 -13/32	380 14 - 61/64
LV-150X LV-6"X	190 7 - 31/64	258 10 - 5/32	330 12 - 63/64	399 15 - 45/64
LV-200 LV-8"	218 8 - 37/64	276 10 - 55/64	389 15 - 5/16	470 18 - 1/2