1. X
axis: 15.75" (400 mm)
2. Y
axis: 11.81" (300 mm)
3. Z
axis: 11.81" (300 mm)
4.
Maximum machining current: 30 A
5.
Electrode Dia.: Ф0.012"~Ф0.12" (Ф0.3 mm~Ф3.0 mm)
Small
hole edm is in many ways similar to a drilling operation but it offers the
advantages of edm. Very low machining forces make the drilling of delicate
parts possible. The workpiece hardness or angle of entry have no detrimental
impact on performance. Holes are virtually burr free.
Amasun small
hole drilling provides you cost effective solution on EDM working to make you
be competitive in market. Reliable US based after-sale service to help you
solve any problems timely.
Application:
1.
Coolant holes in hardened machine tool bits for taps, end mills, and drills
2.
Addition of wire edm start holes after heat treating
3.
Removal of broken drill bits and taps
4.
Placement of holes too small/difficult for conventional drilling
5. Burr
free holes
Overall
dimension(L × W × H) |
(mm) / (inch) |
1000 × 1000 × 1900 |
Weight |
(KG) / (lbs) |
700/1544 |
Working table |
(mm) / (inch) |
440 x 320 |
Y axis |
(mm) / (inch) |
300 |
X axis |
(mm) / (inch) |
400 |
Z axis |
(mm) / (inch) |
300 |
Weight Capacity of Workpiece |
(KG) / (lbs) |
300/661.4 |
Electrode |
(mm) / inch |
Ф0.15~Ф3.0 |
Ф0.006"~Ф0.12" |
||
Spindle(Z axis) Max feed speed |
(mm/min) |
2200 |
Fpm |
7 |
|
Rotate speed of spindle head(C
axis) |
r/pm |
0~500 |
Max. input power |
KVA |
4 |
Input power |
V/Hz |
AC220/60Hz, 3ph |
Max machining current |
A |
30 |
DROs |
|
3 axes |
Working liquid supply |
|
Electrical pump |
Max working pressure |
Mpa |
7 |