1. X axis: 17-3/4" (450 mm)
2. Y axis: 13-3/4" (350 mm)
3. Z axis: 11-13/16" (300 mm)
4. Maximum machining current: 30 A
5. Electrode Dia.: Ф0.006"~Ф0.12" (Ф0.15 mm~Ф3.0 mm)
Small hole edm is in many ways similar to a drilling operation but it offers the advantages of edm. Very low machining forces make the drilling of delicate parts possible. The workpiece hardness or angle of entry have no detrimental impact on performance. Holes are virtually burr free.
Amasun small hole drilling provides you cost effective solution on EDM working to make you be competitive in market. Reliable US based after-sale service to help you solve any problems timely.
Application:
1. Coolant holes in hardened machine tool bits for taps, end mills, and drills
2. Addition of wire edm start holes after heat treating
3. Removal of broken drill bits and taps
4. Placement of holes too small/difficult for conventional drilling
5. Burr free holes
Overall dimension(L × W × H) | (mm) / (inch) | 1000 × 1000 × 1900 39-3/8 × 39-3/8 ×74-51/64 |
Weight | (KG) / (lbs) | 800/1763 |
Working table | (mm) / (inch) | 440 x 320 17-21/64 x 12-19/32 |
Y axis | (mm) / (inch) | 350 13-3/4 |
X axis | (mm) / (inch) | 450 17-3/4 |
Z axis | (mm) / (inch) | 300 11-13/16 |
Weight Capacity of Workpiece | (KG) / (lbs) | 300/661.4 |
Electrode | (mm) / inch | Ф0.15~Ф3.0 |
Ф0.006"~Ф0.12" | ||
Spindle(Z axis) Max feed speed | (mm/min) | 2200 |
Fpm | 7 | |
Rotate speed of spindle head(C axis) | r/pm | 0~500 |
Max. input power | KVA | 4 |
Input power | V/Hz | AC220/60Hz, 3ph |
Max machining current | A | 30 |
DROs | 3 axes | |
Working liquid supply | Pneumatic pump | |
Max working pressure | Mpa | 10 |