About this product
1. Max. drilling capacity: 1''
2. Table size: 27-9/16" × 7-3/32"
3. Motor: 3/4 HP, 110V, single-phase, 10A
4. Spindle taper: R8
▪ Feed spindles can be adjusted without clearance due to adjustable spindle nuts
▪ Stable dovetail guiding precision ground and scraped with adjustable V-ledges without
clearance
▪ EMC filter (to protect sensitive electronics for override mains-borne signals)
▪ Spindle is supported by high precision taper NSK bearing
▪ Drilling Milling head rotation by ±90° for milling and drilling works at different angles
▪ Height adjustable protective screen with micro switch providing maximum protection of the user against chips and parts flying off at high speed
Max. Drilling Capacity | 25mm | ||||||||||
Max End Milling Capacity | 20mm | ||||||||||
Max. Face Milling Capacity | 63 mm | ||||||||||
Table Size | 700 × 180mm | ||||||||||
Table Travel (X,Y) | 480 × 175mm | ||||||||||
T-Slot | 3×12 mm | ||||||||||
Spindle Taper | R8 | ||||||||||
Spindle Stoke | 50 mm | ||||||||||
Step Of Spindle Speeds | Variable speed | ||||||||||
Angle Of Spindle Speeds | 20-2250rpm | ||||||||||
Spindle Incline Angle | ±90 | ||||||||||
Distance From Spindle Nose To Table | 270mm | ||||||||||
Motor | 750W | ||||||||||
Net/Gross Weight | 125/145 kg | ||||||||||
Packing Size | 710 x 710 x 890mm |