The Bolton Tools ZX45PDXL is the new and improved upgraded ZX45PD. Same 2 HP motor and same specifications, but with 1 key upgrade: a 9.5" x 40" table! The Bolton Tools ZX45PDXL is an exciting new addition to the Bolton Tools milling machine offerings!
Built with a precision hardened and ground dove tail column, a large table, and a heavy duty R8 taper, the ZX45PDXL will be the only bench top milling machine you will ever need!
NOTE: Power Feed requires installation
SPECIFICATIONS:
- Max. drilling capacity(steel): 1-1/5"
- Max. drilling capacity(lron): 1-4/5"
- Max. end milling capacity: 1-1/5"
- Max. face milling capacity: 3-1/5"
- Drawbar Thread: 7/16"-20
- Drill Chuck Arbor: R8/JT33 Included
- Swivel angle of head-stock at level direction 360°
- Cross travel: 7 7/8"
- Longitudinal travel: 19 7/10"
- Max distance spindle to column: 10 1/4"
- Head stroke: 12"
- Spindle Taper: R8
- Spindle stroke: 5"
- Max. distance spindle to table: 20"
- Spindle speeds : 6.
- Range of spindle speeds: 60Hz, 95,175,310,450,850,1500RPM.
- Head rotation: 90 degree.
- Horsepower: 2hp.
- Motor Type: A/C.
- Single Phase
- 3-AXIS DRO
- Power Feeder must be Installed
- Voltage: 110 or 220 Volts. Standard 110 volts
- Draw Bar thread 7/16"-20
- Shipping Weight: 839 lbs.
- Crate Dimensions: 35" x 31"x 48"