About this product
Note: Add engine oil. A new engine is shipped without oil. You must add the correct amount of oil to engine crankcase or engine will be damaged beyond repair.
1. Professional 42CrMo material carbide blade.
2. Upgraded Drum Braking System.
3. KEVLAR belts, durable than normal rubber belt.
4. Cuts any diameter stump up to 10 inches high or 9 inches below ground.
5. German TUV-Rheinland CE-MD/EMC/NOISE certification.
- After cutting down a big tree, there will leave a stump. Although you might think the stump is dead and will rot away on its own, it's very much alive. Believe it or not, a tree stump will attempt to re-grow into a tree by sprouting shoots. So grind it away using a stump grinder is the most efficient and thorough way.
- The stump grinder can be used to remove many tree stumps and exposed root systems close to ground level. By moving the blades in sweeping movements laterally over the top and front of the stump, you can gradually grind it away.
Model | TQ-SG15 |
Engine | 15 HP 420cc RATO R420 Engine, 4-stroke OHV Single Cylinder |
Start Type | Recoil Start |
Oil Capacity | 1.1L |
Recommend Oil | SAE 10W-30 |
Fuel Tank Capacity | 6.5L |
Recommend Fuel | Unleaded gasoline (octane number 87 or higher) |
Certification | TUV-Rheinland CE-MD/EMC |
Operating RPM | 3600 RPM |
Cutting Below Ground | 9"/23 cm |
Cutting Above Ground | 10"/25.4 cm |
Blade | 8pcs carbide blades with Tungsten |
Belt | 2pcs V-belt |
Brake | Drum brake |
Clutch | Large torque clutch |
Package Dimension(L*W*H) | 42 x 30 x 25.6 inch/1070 x 760 x 650 mm |
Gross Weight | 264.5 lbs/120 kg |