About this product
Tire changer
| 1. Power supply : 110V-1ph-60Hz. |
| 2. Rim clamping from outside : 11"-21"/280-530mm. |
| 3. Rim clamping from inside : 13"-24"/330-610mm. |
| 4. Max wheel diameter : 43"/1100mm. |
| 5. Max wheel width : 13"/330mm. |
Wheel Balancer
| 1. Power supply: 110V 1Ph 60Hz. |
| 2. Balancing precision: ±1g. |
| 3. Cycle time: 8s. |
| 4. Rim diameter: 10"-24". |
| 5. Rim width: 1.5"-20". |
Tire changer
1. 24" large table provide rigid perimeter support of the wheel and clear view of clamp engagement.
2. Special steel demount head, more wear-resisting.
3. Upgrade clamping jaws, eliminating damage to wheels due to slippage, Ø80 pneumatic clamping cylinders control all four clamping jaws.
4. Low profile machine case, more stable and easy operation.
5. Stainless steel and aluminum pneumatic cylinders.
6. Six - way pneumatic lock, convenient and practical.
7. The motor control part adopts multi-point contactor, which is durable and more effective to ensure the motor is not ablated.
Standard turntable
Anti-scratch gasket design, can ensure smooth operation of the jaws for a long time, durable and safe
Using carbon structural steel jaws
Using carbon steel jaws with a more reasonable angle and better hardness, no matter the inner support or the outer clamp, will firmly fix the wheel
Standard cylinder
The tensile force is better. Corrosion-resistant and rust-resistant. The connecting rods of the two cylinders make full use of the mechanical principle, and adopt a design that is thick in the middle and tapered at both ends, which greatly enhances the tensile force.
Wheel Balancer
1. With static balance and various aluminum alloy modes and motorcycle balance modes
2. Adopt high precision balance shaft
3. Optional protective cover, no center hole clamp and Isuzu large cone block
4.Automatic failure analysis to assist customers in accurately diagnosing problems and repairing machines when machine problems occur.
5.Software automatically calculates the minimum amount of weight needed to achieve optimal balance, saving valuable time and minimizes errors.
Using high precision spindle
Using 36 mm rotating shaft, can be idling, and the accuracy is equally high for heavy tires
Motor and belt
Adopt silent motor and toothed rubber belt to reduce noise and increase belt life
Motor and belt
Adopt silent motor and toothed rubber belt to reduce noise and increase belt life
Tire changer
| Model | C-509 |
| Rim Clamping from Outside | 11"-21"/280-530mm |
| Rim Clamping from Inside | 13"-24"/330-610mm |
| Max Wheel Diameter | 43"/1100mm |
| Max Wheel Width | 13"/330mm |
| Bead Breaker Force | 2500kgf |
| Working Pressure | 8bar |
| Power Supply | 110V-1ph-60Hz |
| Net Weight | 204kg/450lb |
| Gross Weight | 219kg/485lb |
| Dimension | 1092 x 812 x812mm 43" x 32" x 32" |
| Packing Size | 1143 x863 x 863mm 45" x 34" x 34" |
Wheel Balancer
| Max Wheel Weight | 132lbs./60kg |
| Max Power Consumption | 180-300W |
| Power Supply | 110V-1ph 60Hz |
| Balancing Speed | 200rpm |
| Balancing Precision | ±1g |
| Rim Diameter | 10"-24"/265-615mm |
| Rim Width | 1.5"-20"/40-510mm |
| Cycle Time | 8S |
| Net Weight | 200lbs./90kg |
| Gross Weight | 242lbs./110kg |
| Dimension | 940 x 584 x 1092mm 37" x 23" x 43" |
| Packing Size | 990 x 635 x 1143mm 39" x 25" x 45" |