3 HP Brass Impeller Centrifugal Pump CFM 350 BR – 158GPM 85Ft.Max.Head – 220V – 1Phase
The Speroni CFM 350 is a brass impeller centrifugal pump with a cast iron impeller that is great for pumping clear water and other non aggressive liquids.
- Can pump clear water, and non aggressive liquids
- Great for water supply, spraying, flow irrigation and high pressure systems
- Single Brass impeller
Applications
Centrifugal Monoblock with cast iron impeller. These machines are ideal for pumping clean water and other chemically and mechanically non-aggressive liquids. Used for a wide variety of applications in civil, agricultural, industrial or general plant uses. Water supply, spray or flowing irrigation, autoclave feed, high pressure system and any other general service requiring transfer of clean liquids.
Technical Specifications
| Model | CFM 350 BR |
| Brand | Speroni |
| Manufacturer’s Warranty | 1 year Limited Warranty |
| Ship Weight | 74.7 |
| Port Size (in.) | 3″ & 2″ |
| Maximum Flow (GPH) | 9510 GPH |
| Maximum Head (ft) | 85ft |
| HP | 3HP |
| Volts | 220V – 60Hz |
| Suction Port (in.) | 3″ |
| Discharge Port (in.) | 2″ |
| Self-Priming | No |
| Dimensions L x W x H (in.) | 13.7″ x 8.1″ x 10.1″ |
| Product Weight (lbs.) | 69.7lbs |
Dimensions
| Type | Dimensions | Dimensions | Weight | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | H | H1 | N | DNA | DNM | P | L | H | lb | |
| CFM 350 BR | 3.9″ | 2.2″ | 16.9″ | 8.7″ | 6.7″ | 0.6″ | 9.4″ | 12.2″ | 5.2″ | 2.8″ | 3″ | 2″ | 11.1″ | 19.3″ | 14.4″ | 69.7 |
Performance Curve
Performance Table
| Type | Nominal Power | Input Power | Amperage | Capacity | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 220V – 60Hz | HP | KW | kW | 1 x 220v | GPM | 26.4 | 39.6 | 52.8 | 79.3 | 92.5 | 105.7 | 118.9 | 132 | 158.5 |
| CFM 350 BR | 3 | 2.2 | 3 | 16A | lt/1′ | 100 | 150 | 200 | 300 | 350 | 400 | 450 | 500 | 600 |
| Head (ft) | 85.3′ | 83.7′ | 82′ | 77.1′ | 73.8′ | 70.5′ | 67.3′ | 62.3′ | 49.2′ | |||||
Features
Operating Conditions
- Liquid temperature up to 95°F (for home use according to EN 60335-2-41)
- Temperature max. liquid: 194°F (for other uses)
- Ambient temperature up to 104°F
- Total suction lift up to 23ft.
- Continuous duty
Motor
- Two-Pole induction motor (n = 3450 min-1)
- Insulation Class F
- Protection IP 55
Materials
- Pump body: Cast Iron
- Motor Support: Cast Iron
- Impeller: Cast Iron
- Shaft with rotor: Stainless Steel AISI 304
- Mechanical seal: Ceramic/Graphite/NBR