About this product
1. Main motor: 7-1/2 HP TEFC,220V,3-phase
2. Scoring motor: 1.5 HP TEFC
3. Main blade size: 12"
4. Main blade tilt: 0-45°
5. Main blade arbor speed: 2800/4000/5600 RPM
6. Parallel fence with DRO by handwheel
FEATURES:
- You can choose 3 blade speeds (2800,
4,000, and 5,600 rpm) depending on the hardness and thickness of your
material.
- Accepts a
huge 14" blade without modification.
- Includes fences for rip cuts, crosscuts and milter cuts. All fences is micro adjustable. Miter fence has two swing stops for repetitive cutting. Aluminum alloy crosscut fence is for miter cutting 45° right and left.
- Three aluminum composite handwheels allows you to adjust the blade up and down, tilt the blade, adjust the fence and incorporates a digital readout (DRO) for telling you the distance of the fence.
- 1 hp scoring blade spins at 8,500 rpm to ensure a crisp, clean cut without frayed or ripped edges.
- Blade can tilt 45° for miter
cutting.
- Includes adjustable riving knife
adjustment.
- Scoring blade saves you time. No extra
work sanding edges after a cut.
- Sliding table slides on bearing guide system with
hardened steel ways for jitter-free motion.
- Table is made of fully-extruded, anodized
aluminum that will stay square and true over many years of use.
- Rugged all-steel base stabilizes
the machine and reduces vibrations for flawless accuracy and alignment.
- cast steel trunnion.
- Includes a safety blade guard with
a tension system for lifting and lowering the guard without moving it from
side to side.
- 5"(120mm) main dust port and 3"(80mm) upper dust
port let you hook up extraction
systems to keep your shop clean.
- Includes magnetic switch with thermal
overload protection.
Type |
S350T |
Sliding Table |
16×126 IN (405×3200MM) |
Fixed Table |
41.34×25.6 IN (1050×650MM) |
Motor |
7.5 HP (5.5KW) |
Main Blade |
12 IN(300MM)/14 IN (350MM) |
RPM |
2800/4000/5600 |
Depth of cut 90° |
3.15 IN (80MM) |
Depth of cut 45° |
2.6 IN (65MM) |
Rip Capacity |
49.2 IN (1250MM) |
Scoring Motor |
1.5 HP (1.1KW) |
Scoring Diameter |
0.8 IN (20MM） |
Scoring Blade RPM |
8500 |
Cut Length |
118 IN (3000MM) |
Arbor Tilt |
0-45° |
NO.of Dust Outlets |
2 |
Dust Outlets Diameter |
4.7 IN (120MM) & 3 IN (80MM) |
Table Height |
35.4 IN (900MM) |
Dust Requirements |
1000 CFM |
Electrical |
3 PH / 60Hz / 220V |