※ Heating plate coating
Please take care on handling the heating plate. Keep a certain distance away from heating plate. Cleaning of its surface must be done with surface still warm by using a soft cloth or paper, avoid abrasive materials in that might damage the coating.
At regular intervals check as follows
1) Clean the surface by using a quick evaporation detergent (alcohol)
2) check the tightening of the screws and the cable and plug condition
3) Verify its surface temperature by using infrared-ray scanning
※ Milling cutter
It is strongly suggested to keep always clean the blades and wash the pulleys by using a detergent. At regular intervals, carry out a complete cleaning operation.
Type | φ250 | |
Materials | PE, PP, PVDF | |
Max. Range Of Diameter | 90 - 250 mm | |
Ambient Temp. | -5～40 ℃ | |
Power Supply | 220V ± 10％ | |
Frequency | 50 Hz | |
Total Power | 4.2 kW | |
Include: Heating plate | 2.35 kW | |
Milling Cutter Motor | 1.1kW | |
Hydraulic Unit Motor | 0.75 kW | |
Dielectric Resistance | >1MΩ | |
Max. Pressure | 4.5MPa | |
Total Section Of Cylinders | 11.16cm2 | |
Hydraulic Oil | 40～50 (kinematic viscosity) mm2/s, 40℃ | |
Max. Temperature Of Heating Plate | 270℃ | |
Difference In Surface Temperature Of Heating Plate | ±3℃ | |
Basic Frame | Size, mm | 930 × 580 × 560 |
Hydraulic Unit | Size, mm | 815 × 550 × 660 |
Total Weight | W.G., kg | 146 |