This bead breaker is very well-liked for bead breaking of truck and agricultural tyres. The bead breaker can be used for 1, 2 and 3-pieced rims.The distance between claw and extrusion leg is adjusted to 7.1in(180mm),7.4in(190mm),7.8(200mm)
For connecting a hydraulic pump simply remove the sealing plug of the hydraulic stamp. The matching thread size for the connection of the pump is 3/8".
Connect the hydraulic pump (manual or air) to the bead breaker through the quick-couplers. If you use the air/hydraulic pump, you must connect it to a source of compressed air of 100-120 psi. (See separate manual of the air/hydraulic pump!) Test the beadbreaker before you attach it to the rim. Release all air from tire, remove cap and valve and the valve extension included. Verify that the tire is completely deflated
BEAD BREAKER
| Capacity | 10 Tons |
| Pressure | 10000 PSI |
| N.W. | 38.5Lbs |
| G.W. | 40.7Lbs |
| Package Size | 15.3 x 15.3 x 6.7 Inch |
| Operational Manner | Foot Pump |
| Input Port Threads | 3/8"-18‘’. |
| Length | 9.8 Inches |
| Width | 5.4 Inches |
| Height | 7.4 Inches |
| N.W. | 17.1 Lbs |
| G.W. | 18.7 Lbs |
| Effective Oil Capacity(cu.in.) | 140 |
| Air Pressure | 0.6-1.0 Mpa |
| Size | 9.8 x 5.4 x 7.4 Inch |
| Package Size | 11 x 5.9 x 7.8 Inch |
| Input Port Threads | 1/4"-18 |
| Output Port Threads | 3/8"-18 |
| Reservior Material | Aluminum |
| Operational Manner | Foot Pedal |
| Pressure Rating(PSI) | 10000 |