Features:
● The CUT-70F model is an inverter-based plasma cutting machine which using the latest in IGBT technology. This machine is portable reliable one with features that you can expect from a quality plasma cutter. The CUT-70F produces a high temperature plasma stream providing effortless cutting of all electrically conductive materials including steel, cast Iron, stainless steel, copper, aluminium brass etc .
● The CUT-50 is equipped with a high quality p80 Plasma torch and used untouched-way to start arc with a pilot arc. It is a efficient plasma cutting machine suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services.
Package Include:
● 5 metre P80 plasma cutting torch x 1
● 2 metre ground cable x 1
● 2 metre hose x 1
● Air filter regulator x 1
● Cutting accessories (electrode,nozzle,shield cup) x 5
● PTFE tape x 1
● Hose clamp x 2
● Steerable wheel x 1
| Model Spec. | CUT-70F |
| Power supply voltage | 220v |
| Power frequency | 50~60 Hz |
| Power supply capacity | 8.5kVA |
| Rated input current | 40A |
| No-load voltage | 300 V |
| Output current range | 20-60 A |
| Output voltage | 104 V |
| Duty cycle | 60% |
| Efficiency | 85% |
| Tip hole diameter | 1.3 mm |
| Arc striking model | Untouch |
| Cosφ (η) | 0.93 |
| Air pressure | 0.35-0.5MPa |
| Cutting thickness | 1-20 mm |
| 1-15 mm | |
| 1-12 mm | |
| Air flow | 130 L/min |
| Insulation grade | F |
| Protection grade | IP 21 S |
| Net Weight | 14 kg |
| Dimensions (mm) | 520 × 205 × 400 mm (20.47 × 8.07 × 15.75 inch) |