About this product
| 1. Tire Changer Power Supply : 110V, 60Hz, 1Ph, 1.47 Hp |
| 2. Clamp Rim Size Outside: 14″ - 24″ |
| 3. Clamp Rim Size Inside: 16″ - 26″ |
| 4. Max. Tire Width: 12″ (315 mm) |
| 5. Max. Wheel Diameter: 44″ (1120 mm) |
Tilt-back Tower Design
The tilt-back tower provides greater clearance and access for tire removal and inflation.
Upgraded Reversible Mount/Demount Head
The new flip of the tire head, eliminating the crowbar, disassembly and assembly of hard wall flat tire is more time-saving, labor-saving.
Advanced Mechanical Arm
Advanced mechanical arm, the pulley part of the form of a set, embedded wear-resistant sliding block, with fine grinding square tube, so that the mechanical arm can run smoothly and freely.
Auxiliary Arms Run Smoothly
All joints of the auxiliary arm are installed with vertebral body bearings, which are stable and smooth without jamming.
Three-point Assist
Three-point compression structure, more stable when installing tires.
28" Thickened Plate
Thickened work plate, claws made of precision cast steel, non-slip and durable claw protection cover, high-quality all-aluminum small cylinder.
Large Aluminum Alloy Cylinder
The large aluminum alloy cylinder can reduce machine vibration and friction, thereby increasing the service life of the cylinder.
Great Bead Breaker Structure
Hand-controlled large shovel structure, patented design, vertical palm button structure and perfect press damping, combined with the universal large shovel structure, the shovel tire is easy to operate.
Top-quality Pneumatic FRL
Special explosion-proof level lubricator, good pressure resistance effect and high safety factor.
| Voltage | 110 V, 60 Hz, 1 Ph |
| Power | 1.47 Hp (1.1 kW) |
| Clamp Rim Size Outside | 14″ - 24″ |
| Clamp Rim Size Inside | 16″ - 26″ |
| Max. Tire Width | 12″ (315 mm) |
| Max. Wheel Diameter | 44″ (1120 mm) |
| Working Pressure | 116 - 145 psi (8bar - 10bar) |
| Max. Inflation Pressure | 50.75 psi (3.5 bar) |
| Rotation Speed of Turntable | 6 r/min |
| Max. Shaft Torque | 1200 Nm |
| Pressure of Bead Breaker | 6614 lbs (3000 kg) |
| Level of Noise | ＜75 dB(A) |
| Machine Size | 70″ × 51.2″ × 78″ (1780 × 1300 × 1990 mm) |
| Net Weight | (The standard model ) 805 lbs (356 kg) |