With the thermal office& school roll mounting laminator, you can achievetop-quality lamination with all film thicknesses up to 5 mil. It features a26" wide feed to handle the most common paper sizes including, even largeposters and signs. It features an adjustable speed up to 5.25 feet per minute.The heated roll laminating machine comes standard with a 1 year manufacturer'swarranty.

Features:

1. High quality, low noise, speedadjustable motor.

2. Temperature digital display, direct andconvenient.

3. Roller inside heater system, efficiencyand stable heat for roller 8-bit micro process control system.

4. Key press control panel, easier and moreconvenient operation.

5. Pouch film and roll film laminating, hotand cold laminating functions satisfy various needs of different customers.

6. Both temperature and speed adjustablefor more professional use.

HOT LAMINATING

1.Turn on the machine, press the SELECTbutton until the HOT lamp is light, the machine begins to heat. Set thetemperature for whatever film is being used.

2. The laminator will be ready to operationin about 10 minutes.

Remind: keep clear and enough space behindthe machine, so that the laminated item can come out easily, it will not windonto the rubber roller. If the machine is stopped for a long period, set thetemperature decreased by 5-10'C, this will prolong the work-life of themachine. Stop the machine after the item to be laminated pass through theroller completely, otherwise there will be an imprint on the item.

Temperature setting

Normally, your film supplier should providethe information about the film application temperatures and operatingcharacteristics. If you do not know the source of your film, or if the suppliercannot provide the information, please try the temperature and speed until youhave the best result.

COLD LAMINATING

Press the SELECT button until the COLD lampis light, set the speed at level 4 or 5. Load the cold film as the sameprocedures of hot film; or insert the cold film and the item to be laminatedinto the roller simultaneously.

CAUTION: The adhesive side must face awayfrom the roller.